Page 7 of 38
INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
3.0 SAFETY DEVICES
P E R I O D I C A L LY, AT L E A S T
MONTHLY, CHECK THE INTEGRI-
TY AND THE FUNCTIONALITY OF
THE SAFETY AND PROTECTION
DEVICES ON THE MACHINE.
All the machines are equipped with:
• man-operated controls (immediate stop of operation
when the control is released) for all operating devices;
• mandrel rotation;
• tool translation;
• bead breaking roller translation.
• Non-adjustable pressure limiter.
This allows inflation of tyres in reasonable safety.
Inflation of tyres to over 4,2 ± 0,2 bar (60 PSI) is
not allowed.
• Controls logic disposition
Its function is to prevent the operator from dange-
rous mistakes.
• Motor protection devices
The new “Invemotor” motor is equipped with elec-
tronic protection devices. They stop the motor if
working defected conditions appear to avoid that the
motor itself can be damaged and that the operator
safety can be compromised (overvoltage, overload,
overtemperature). For other details, see the chapt.
14 “Fault-Finding”.
3.1
Residual risks
The machine was subjected to a complete analysis of
risks according to reference standard EN ISO 12100.
Risks are as reduced as possible in relation with
technology and product functionality.
This manual stresses possible residual risks, also hi-
ghlighted in pictograms and adhesive warning signals
placed on the machine: their location is represented
in “PLATE LOCATION ON MACHINE INFORMATION
TABLE” on page 5.
4.0 GENERAL SAFETY RULES
• Any tampering with or modification to the machi-
ne not previously authorized by the manufacturer
exempts the latter from all responsibility for damage
caused by or derived from said actions.
• Removing of or tampering with the safety devices or
with the warning signals placed on the machine leads
to serious dangers and represents a transgression of
European safety rules.
• The machine may be used only in areas free from
the danger of explosion or fire.
• The use of only original accessories and spare parts
is advised. Our machine is designed to function only
with original accessories.
• Installation must be conducted only by qualified
personnel exactly according to the instructions that
are given below.
• Ensure that there are no dangerous situations during
the machine operating manoeuvres. Immediately
stop the machine if it malfunctions and contact the
assistance service of an authorized dealer.
• In emergency situations and before carrying out any
maintenance or repairs, disconnect all supplies to
the machine by using the main switch.
• Ensure that the work area around the machine is free
of potentially dangerous objects and that there is no
oil since this could damage the tyre. Oil on the floor
is also a potential danger for the operator.
OPERATORS MUST WEAR SUITA-
BLE WORK CLOTHES, PROTEC-
TIVE GLASSES AND GLOVES,
AGAINST THE DANGER FROM THE
SPRAYING OF DANGEROUS DUST,
AND POSSIBLY LOWER BACK SUP-
PORTS FOR THE LIFTING OF HE-
AVY PARTS. DANGLING OBJECTS
LIKE BRACELETS MUST NOT BE
WORN, AND LONG HAIR MUST
BE TIED UP. FOOTWEAR SHOULD
BE ADEQUATE FOR THE TYPE
OF OPERATIONS TO BE CARRIED
OUT.
SEIDO.30 - SEIDO.30FI
7105-M005-10_B
