BUSKRO BK731 Скачать руководство пользователя страница 6

Страница: 6 / 85

Chapter 1

General

Information

Page 1-1

1.1 Description

The Buskro BK731 Labeler is designed to apply pressure-sensitive labels onto mail

pieces. The system offers full flexibility in its ability to apply labels onto mail pieces.

Simplified mechanical adjustments and software controlled label placement functions

offer unsurpassed ease of use permitting rapid job setups.

In keeping with Buskro’s philosophy of ease of use, the Labeling head is designed with

many innovative features. The Labeling head is controlled through software via an

operator keypad that permits rapid selection of the number of labels dispensed and their

placement positions. A unique label-sensing feature allows the operator to easily adjust

the label pitch at a touch of a button. The Labeling head mechanism was designed with

few mechanical parts to allow easy label threading and machine setup to improve

productivity. The Labeling head is mounted on two aluminum extrusion rails, which

allow the Labeling head to be moved easily from side to side to allow labels to be placed

at different locations on the mail piece and facilitate fine tune adjustment. In addition, the

peel point assembly can be adjusted up, down, and laterally for different material

thicknesses and label widths.

All these features, in addition to the manufacturing quality and innovative product design

add up to an extremely functional labeling system capable of years of reliable and trouble

free operation.

1.2 Features

1.2.1 High Speed Production

The BK731 Labeling head is capable of high production speeds in excess of 35,000 PPH

for single label operation, 30,000 PPH for double label operation, and 28,000 PPH for

triple label operation. The unit has been solidly constructed with electrical components

capable of delivering reliable, full-day production.

Buskro Ltd.

BK731 Labeler

Содержание BK731






















































































Результаты поиска

Содержание BK731

Отзывы:

Похожие инструкции для BK731

Бренды по названию

Популярные бренды

BUSKRO BK731, Руководство пользователя

Результаты поиска

Содержание BK731

Отзывы:

Похожие инструкции для BK731

Бренды по названию

Популярные бренды