5
Warning:
• Water that has flown through backflow preventers is considered to the non-potable.
• The machine shall be disconnected from its power source by removing the plug from the socket-outlet during cleaning
or maintenance and when replacing the machine to another function.
• Observe a distance of at least 30cm when using the jet to clean painted surfaces to avoid damaging paintwork.
• Do not use the machine if a power supply cord or important parts of the machine are damaged, e.g. safety devices, high
pressure hoses, trigger gun.
• If an extension cord is used, the plug and socket must be of watertight construction.
• Inadequate extension cords can be dangerous. If an extension cord is used, it shall be suitable for outdoor use, and the
connection has to be kept dry and off the ground. It is recommended that this is accomplished by means of a cord reel
which keeps the socket at least 60mm above the ground.
• In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied
through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by
the utility. The machine is not intended to be connected to the potable water mains.
• To ensure the machine safety, please only use original spare parts (including nozzle) from your local BushRanger
Dealer
™
or approved by your local BushRanger Dealer
™
. Do not use the machine before you changed them if they are
damaged.
• Be careful of the danger of the kickback force on the spray assembly when opening the trigger gun and grasp the gun
with hands firmly.
• To reduce the risk of injury, close supervision is necessary when a machine is used near children. High-pressure
cleaner shall not be used by children or untrained person.
• Know how to stop the machine and bleed pressures quickly. Be thoroughly familiar with the controls.
• Stay alert and watch what you are doing.
• Do not operate the machine when fatigued or under the influence of alcohol or drugs.
• Keep operating area clear of all persons.
• Do not overreach or stand on unstable support. Keep good footing and balance at all times.
• Follow the maintenance instructions specified in the manual.
• This machine must be grounded. If it malfunctions or breaks down, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances. The rating voltage (V/Hz) of the machine has
to be in compliance with the local power supplying voltage.
• Check with a qualified electrician or service personnel if you are in doubt as to whether the outlet is properly grounded.
Do not modify the plug provided with the machine. If it will not fit the outlet, have a proper outlet installed by a qualified
electrician. Do not use any type of adapter with this machine.
