_
5
_
Assembly
Installing Left Grip
Screw in the left grip to the bracket provided on the frame
and tighten securely.
Installing Drill
1. Slide the clip band and remove the lock pin from the drill.
2. Put the drill onto the auger output shaft and insert the lock
pin. Cover it with the clip band.
Adjusting Throttle Cable
The normal play is 1 to 2mm when measured at the carbu-
retor side end. Readjust with the cable adjuster as required.
(1) PTO Shaft
(2) Clip Band
(3) Drill
(4) Lock Pin
Left Grip