The resolution can not be changed on any of the trail cameras.
Can I use a higher capacity SD card than what comes with
the unit?
You can use a higher capacity card than what comes with the unit. We have tested cards
up to 512MB. Any card larger has not been tested.
Can I use rechargeable batteries in my camera?
Since most rechargeable batteries operate at 1.2V instead of 1.5V we cannot recommend
rechargeable batteries. The Bushnell Trail Cameras are designed to operate at 6V by
using a mininum of 4-AA batteries.
Field Scan (Time Lapse) not working properly
Make sure that the stop and start times of Field Scan "A" and "B" do not overlap. (for
example, do not set the start time of "B" to 8AM if the start time of "A" is 10AM).
When Using Field Scan in Video Mode, the smallest interval time available is 5 minutes,
to avoid potential overheating of the batteries and electronic components, which could
cause operational failure or damage to the camera. In still photo mode a 1 minute interval
can be set.
How can I print my images?
You can print your images directly from your computer if you have an SD card slot or
external reader. You can also take the SD card to a photo center and have them printed.
How do I set the time for the day or night mode?
Use miltary time to set the start and stop times for day or night. This is only applicable if
the switch for imaging is set to "Day" or "Night" mode. In 24 hour mode, the camera
does not need to know when the day begins or ends.
How do I use the new Camera Name Input on the Bushnell
Trophy Cam HD?
After selecting the Camera Name parameter (the only setting is "Input"), press OK. If
necessary, delete the previous or default name by pressing the RIGHT key until the
backspace symbol (<- ) (located between letters "A" & "B", also between "j" & "k") is
highlighted, then keep pressing OK. Select (highlight) each alphanumeric character you
