User Instructions
Before first use
Always use salt intended for use with
dishwasher.
The salt container is located beneath the basket
and should be filled as follows:
Attention!
·
Only use salt specifically designed for use in
dishwashers! All other types of salt not
specifically designed for use in a dishwasher,
especially table salt, will damage the water
softener.
·
Only fill with salt just before starting one of
the complete washing programmes.
This will prevent any grains of salt or salty water,
which may have been split, remaining of the
bottom of the machine for any period of time,
which may cause corrosion.
Loading the salt into softener
1. Remove the basket and then unscrew and
remove the cap from the salt container.
(Fig 1)
2. Fill 1L of water into the salt container.
3. Place the funnel end (supplied) into the hole
and add around 1kg of salt. It is normal if a
small amount of water coming out from salt
container. (Fig 2)
4. Screw the cap tightly back clockwise.
5. Immediately after filling the salt, a washing
cycle should be started (soak or rapid
program suggested). Otherwise the filter
system or pump may be damaged by salty
water.
Important:
y
Only use dishwasher salt
y
Add the salt again when the salt warning light
at control panel is on.
y
It takes time to dissolve the salt so the salt
warning light may still come on even the salt
container is filled.
7
