Bush WI-1810, Инструкция по эксплуатации

Страница: 15 / 25

Using your Internet Radio with Bluetooth
Using your Internet Radio with Bluetooth 28
29
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Using your Internet Radio with Bluetooth
Let’s get started
Using your Internet Radio with Bluetooth
Let’s get started
Listening to Music/Audio using Bluetooth
In Bluetooth mode:
1.
Select and start the music or audio that you wish to listen to on your paired Bluetooth
device, it will now be heard through the radio speaker. Adjust the volume on the
connected device and/or your radio.
2. You can use the controls on your paired Bluetooth device as well as those on your
radio.
3. Controls available on your radio:
• Play/Pause
Short press the ‘3’ button.
• Skip back:
Short press the button.
• Skip forward:
Short press the button.
• Stop
Short press the ‘4’ Stop button.
UPnP mode
If you are not already in UPnP player mode, short press the Mode button until you are in
UPnP mode (check the display).
UPnP media sharing enables your radio to play music from a shared media library. If you
are using a suitable server system such as a computer with Windows Media Player 10 or
later (WMP), and your music library is well tagged, only the UPnP server needs to be set
up.
Note:
If you are an Apple Mac user, iTunes does not currently work as a UPnP media
server, but there are add-ons available to work with an iTunes library, such as Plex
Media Server. These are not covered within this guide.
In order to play the audio files on your radio, you must first ensure the following:
• Your computer is connected to the same router and network as your radio.
• The audio files are stored in the correct location on your computer.
• The audio files are not ‘protected’.
• Your computer has the correct type of audio files and playlists stored on a networked
computer.
• Your computer has file sharing turned on.
• The audio files can be shared on the network.
• You know the name of your computer.
Setting up your Windows computer to allow access to your
audio files
1. Ensure that your computer is connected to the same router and network as your
radio.
2. On your computer, in the Windows Media Player, add to the media library the audio
files and folders that you would like to share with your radio.
3.
In Windows Media Player, enable media sharing, select Library > Media sharing.
4. Ensure that your radio will be able to access the shared media by selecting it within the
Windows Media Player and clicking ‘Allow’. You can also choose a name for the shared
media in ‘Settings’. Click ‘OK’ to close the dialogue boxes.
5. Your computer is now ready to stream the music to your radio.
Playing audio files using UPnP mode
In UPnP mode:
Your radio will load and display the names of the computer(s) on your network that have
shared media available. Use the Navigation/Select rotary control to highlight and select
the computer which has the audio files that you would like to play.