Bush RLBFO, Инструкция по эксплуатации, Страница: 15 / 36

Installing your Built-in Oven
15
or online at www.bush-support.com If you still require further assistance, call one of our experts on 01759 487838.
Installing your Built-in Oven
Bringing it all together
Provision for Ventilation
The appliance housing used must provide adequate ventilation.
For built-in installation, a minimum ventilation space of
85 – 90mm 40mm must exist between the rear of the appliance and the back of the housing
or an adjacent wall.
If a tall housing is to be installed flush with the ceiling, a 20cm² ventilation cut-out must be
provided at the top of the housing.
Electrical Connection
This appliance must be installed by a qualified electrician to comply with the relevant Institution of
Engineering and Technology (I.E.T.) regulations and also the local electricity supply company
requirements.
This appliance must not be connected to an ordinary domestic power point. The mains terminal is
situated on the back of the oven.
•
•
• GREEN AND YELLOW = EARTH
BLUE = NEUTRAL
BROWN = LIVE.
As the colours of the wires in the mains lead for the appliance may not correspond with the coloured
markings identifying the terminals in your spur box, proceed as follows:
1. The wire which is coloured green and yellow must be connected to the terminal marked E
(Earth) or coloured Green.
2.
The wire which is coloured blue must be connected to the terminal marked N (Neutral) or
coloured Black.
3.
The wire which is coloured brown must be connected to the terminal marked L (Live) or
coloured Red.
Connect the cable to the correct terminals. Check that the links are correctly fitted and that the terminal
screws are tight. Secure the mains cable using the cable clamp. Ensure the cable route avoids the risk of
trapping or touching hot surfaces.