Bush NE-6216, Инструкция по эксплуатации

Страница: 7 / 9

11 12
FM display modes
Every time you press the
MENU/INFO
button, the display will cycle through the
following display modes: Radio Text, Programme Type, Frequency, Audio Type,
Power status (Mains/Battery), Time and Date.
Radio Text
This displays the information about the current programme.
Programme Type
This describes the “style” or “genre” of the programme
that is being broadcast.
Frequency
This displays the frequency of the present station, such
as “87.8MHz”.
Audio Type
This displays if the station being received is in mono or stereo.
Power status
Display the power supply is adaptor or battery. If the
power supply is battery, the display will show the battery
capacity (21-100). When the battery is less than 20, the
display will show battery is low.
Time
This display the current time provided automatically by the broadcaster.
Date
This display the current date provided automatically by the broadcaster.
STORING AND RECALLING STORED STATIONS
This function allows up to 10 stations to be programmed into the memory and
stored in both DAB and FM mode.
1. To store a preset, first tune to your desired
station, then press and hold the
PRESET
button
for longer than 2 seconds ,the display will show
the “Preset Store <#:(Empty)>” (F7).
Radio Text
Programme Type
Frequency
Audio Type
Power status
Time
Date
2. Rotate the SEARCH control to select your desired station preset number.
3. Press the
SELECT
button to confirm your selection, the station now
broadcasting has now been stored in the selected location (F8).
4. To listen to the preset stations, press the
PRESET
button once and then rotate
the SEARCH control to select the desired preset location. And press the
SELECT
button to confirm. (F.9) The station name or frequency and preset
location number will be displayed in the lower half of the display. If the preset
has not been allocated “Preset Recall #: (Empty)”, “Preset Empty” will be shown
in the display.
Notes:
If the unit is disconnected from the mains supply for any length of time
and the batteries are not installed, the programmed stations will be lost.
SETTING ALARMS (AC OPERATION ONLY)
1. Alarm will only function when the product is using Mains power.
Attempting to enter Standby mode when powered only by battery
will turn the product off.
2. An active alarm is indicated by its icon at the top line of the display.
3. Alarms can be switched on or off in standby mode. However, the
alarm parameters can only be set when the product is on.
4. To set or change alarm 1, press
ALARM/SNOOZE button once, then
press the
SELECT
button. (F.10)
5. To set or change alarm 2, press the
ALARM/SNOOZE
button twice, then
press the SELECT button.
6. To exist alarm setting mode, press the
ALARM/SNOOZE
button again.
7. The alarm setup prompts you for the following parameters. Select a value for
each parameter in rotating the
SEARCH
control and press the
SELECT
button
to confirm and move on to the next parameter.
8. Parameters
„
On Time –Hours and minutes
„ Duration-15/30/45/60/90 minutes
If the alarm is not cancelled product returns to standby after this time period
Preset Store
< 1 : Empty >
F.7
Preset Recall
< 6 : BBC Radio 6 >
F.9
Alarm 1 Setup
F.10
Preset 1
Stored
F.8