Bush NE-6216, Инструкция по эксплуатации

Страница: 4 / 9

5 6
SWITCHING YOUR RADIO ON FOR THE FIRST TIME
AC Operation
1. Insert the DC power jack of AC/DC adaptor to the DC input socket
located at the rear of the radio.
2. Plug the AC/DC Adaptor to the AC mains outlet.
3. Press the
STANDBY
button to turn the radio on.
Remarks: If the AC Adaptor voltage is over than 6V, it will possible make the
line damage.
DC (battery) operation
1. Ensure the AC/DC adaptor is disconnected from the radio and AC mains.
2. Installed the batteries (4×1.5V UM3/AA battery) into the battery
compartment.
3. Press the
STANDBY
button to turn the radio on.
Remarks: To obtain the best performance in DC operation, the use of
alkaline batteries is highly recommended.
Menus:
Press and hold MENU/INFO button to enter into the “MENU”. Rotate SEARCH
Control to navigate the desire option, then press SELECT button to confirm.
Mode Mode
DAB
DAB Menu
Full Scan
Manual Tune
Prune
System
FM
Menu Menu
System Menu
Time
Sleep
Backlight
Factory Reset
SW version
Backlight Menu
Backlight Low/ Medium/ High
Time Menu
Set Time/Date hh:mm/DD-MM-YYYY
Auto Update Update from Any/Update from DAB/
Update from FM/ No Update
Set 12/24 hour 12/24
Set Date Format DD-MM-YYYY/MM-DD-YYYY
Sleep Menu
Sleep Off /10/20/30/60s/70/80/90minutes
FM Menu
Scan Setting All station/Strong stations only
Audio Setting Stereo Allowed/Forced mono
System
MENU Tree as below: