For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105
Getting Started
Cable Installation
If you select CABLE option and press
OK
button
on the remote control to continue, the following
message will be displayed on the screen:
To continue please select
YES
and press
OK
. To
cancel operation, select
NO
and press
OK
.
You can select frequency ranges from this
screen. For highlighting lines you see, use “
” or “
” button.
You can enter the frequency range manually by
using the numeric buttons on the remote control.
Set
Start
and
Stop Frequency
as desired by
using numeric buttons on the remote control.
After this operation, you can set
Search Step
as
8000 KHz or 1000 KHz.
If you select 1000 KHz, the TV will perform search
process in a detailed way. Searching duration will
thus increase accordingly.
When finished, press
OK
button to start
automatic search. The TV will search and store
available broadcasts.
(*) Network option will not be available for UK.
Information Banner
Whenever you change channel using the
P-/P+
buttons or the numeric buttons, the TV displays
the broadcast picture along with an information
banner at the bottom of the screen.
The information banner can be displayed at any
time while watching TV by pressing the INFO
button on the remote control (fig.8).
Hint: Not all channels broadcast the programme
data. If the name and time of the programme
are not available, then information banner will
be displayed with blanks.
If the selected channel is locked, you must enter
the correct four-digit numeric code to view the
channel (default code is
0000, except for the
France
). “
Enter PIN
” will be displayed on the
screen in such a case.
*
16
