For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105
13
Getting Started
Control Buttons & Operation
1.Up direction
2. Down direction
3. Programme/Volume / AV / Standby-On
selection switch
The Control switch allows you to control the
Volume/ Programme/ Source and Standby-On
functions of the TV.
To change volume: Increase the volume by
pushing the button up. Decrease the volume
by pushing the button down.
To change channel: Press the middle of the
button, the channel information banner will
appear on screen. Scroll through the stored
channels by pushing the button up or down
To change source: Press the middle of the
button twice, the source list will appear on
screen. Scroll through the available sources
by pushing the button up or down.
To turn the TV off: Press the middle of the
button down and hold it down for a few seconds,
the TV will turn into standby mode.
NOTE:
You can move the switch, upward or
downward to change the volume. If you want to
change the channel, press the middle of the switch
once (Position 3) and then move upward or downward.
If you press the middle of the switch once more, the
source OSD will be displayed. To select desired
source, move the switch upward or downward and
release. If you press the middle of the switch and
hold for a few seconds, the TV will switch to standby
mode. The Main menu OSD cannot be displayed via
the control buttons on the TV.
Operation with the Remote Control
Volume Setting
Press V + button to increase the volume. Press
V - button to decrease the volume. A volume level
scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next Programme)
Press
P -
button to select the previous programme.
Press
P +
button to select the next programme.
Programme Selection (Direct Access)
Press number buttons on the remote control to select
programmes between 0 and 9. The TV will switch to the
selected programme. To select programmes between
10-10000, press the number buttons consecutively.
DVD - Control buttons
1.
Disc loader.
2.
Play / Pause ( / ) button
Plays / pauses the disc. When DVD menu (root
menu) is active, this button functions as “button
select” (selects the highlighted item in menu) if
this is not prohibited by the disc).
3.
Stop / Eject ( / ) button.
Stops the disc playing / Ejects or Loads the disc.
NOTE: You cannot eject the disc via the
remote control. To eject while playing a file; you
should press the STOP button “ / ” (on the
TV) three times.
2
3
1