
Product support
Help is always at hand
Product support
92
If you require any technical guidance or
fi
nd that your TV is not operating as intended, a simple solution can often be found in the
Troubleshooting
section of these instructions,
or online at
www.bush-support.co.uk
.
The remote control does not operate.
Check if the TV is working properly
Press the power button on the television to determine if the problem is with the remote control or not.
Check if the remote control is working properly
Point the remote control at the remote control sensor located at the front of the television.
Keep the remote control sensor area clear from obstacles.
Fluorescent light can interfere with remote control operation; try turning o
ff
any
fl
uorescent light.
Check that the orientation of each battery matches the positive (+) and negative (-) symbols in the battery
compartment.
Battery power may be low. Remove the remote control cover and replace the batteries with new ones.
It is not possible to control the Google Assistant with voice
To use your voice to control the Google Assistant, you need a remote control which has a button, in addition the
television must be paired to this remote control.
If your remote is not paired with the TV yet, please follow the steps below:
Press the button on the remote control.
Follow the on-screen instructions to pair the remote control with the television.
Select the detected remote control shown on the screen and press
[OK]
.
Once paired, the pairing screen will disappear.
Pairing the remote
If during the
fi
rst-time installation process the remote was not paired or skipped, then follow the process below to pair
your remote with the television:
Turn the set on.
Go to Settings > Remotes and Accessories or press the button on the remote control.
Now press and hold the
[LEFT ARROW]
and
[HOME]
buttons on the remote control at the
same
time.
The LED indicator on the remote control will start to
fl
ash.
Select your remote control from the list shown on the television screen and press
[OK]
on the
remote
control.
Once paired, the pairing screen will disappear.
Note
: This process will only have to be completed if the remote control has not been paired.
Once paired, when the button is pressed, it will open the Google Assistant screen on the television and activate
voice functionality.
When your remote control is paired, it uses Bluetooth to transmit information. This means that the remote does not
need to be pointed towards the set to work.
HOME
BACK
EXIT
HOME
Troubleshooting Guide
BUS-MAN-0035 - 32+ models.indd Sec1:92
BUS-MAN-0035 - 32+ models.indd Sec1:92
20/05/2021 17:28:26
20/05/2021 17:28:26