Bush DW12LSINT, Инструкция по эксплуатации

Страница: 34 / 40

Product support 34
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Product support
Help is always at hand
Troubleshooting
FAUL T POSSI BLE CAUSE T ROUBESHOOTING
The programme does not
start.
Your Dishwasher is not plugged in. Plug your Dishwasher in.
Your Dishwasher is not switched on.
Switch your Dishwasher on by pressing the On/Off
button.
F use blown. Check your indoor fuses.
Water inlet tap is closed. Turn on the water inlet tap.
Your Dishwasher door is open. C lose the Dishwasher door.
Water inlet hose and machine filters are
clogged.
C hec k the water inlet hose and machine filters
and ma k e sure they are not clogged.
Water remains inside the
machine.
Water drain hose is clogged or twisted. Check the drain hose, then either clean or untwist it.
The filters are clogged. Cl ean the filters.
The programme is not finished yet. Wait until the programme is finished.
M achine stops
during washing.
Power failure. C hec k mains power.
Water inlet failure. C hec k water tap.
Sha k ing and hitting noises are
heard during a wash operation.
The spray arm is hitting the dishes in the
lower bas k et.
Mov e or remo v e items bloc k ing the spray arm.
Partial food wastes remain
on the dishes.
Dishes placed incorrectly, sprayed water not
reaching affected dishes.
Do not o v erload bas k ets.
Dishes leaning each another.
Place dishes as instructed in the section on loading your
dishwasher.
N ot enough detergent used.
U se the correct amount of detergent, as instructed
in the programme table.
Wrong wash programme selected.
U se the information in the programme table to select
the most appropriate programme.
Spray arms clogged with food waste.
C lean the holes in the spray arms with thin ob j ects.
F ilters or water drain pump clogged or
filter misplaced.
Check the drain hose and filters are
correctly fitted.