Bush DW12LSINT, Инструкция по эксплуатации

Страница: 20 / 40

Functions 20
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Functions
Simple everyday use
The Control Panel
4.1 Selecting a Programme
Press the Power On/Off button (1). The End Of
Programme Indicator (3) will illuminate.
Select the programme that best suits your dishes
using the Programme Selection button (2).
The light corresponding to the selected programme
(4) will illuminate and the End Of Programme
Indicator (3) will switch off.
NOTE: If you decide not to start the selected
programme, please see the "Changing a Programme"
and "Cancelling a Programme" sections.
NOTE: When there is not enough dishwasher
salt, the Salt Lack Warning Indicator (3) will illuminate
indicating the salt chamber needs filling.
NOTE: When there is not enough rinse aid,
the Rinse Aid Lack Warning Indicator (3) will illuminate
to indicate the rinse aid chamber needs filling.
4.2 Changing a Programme
If you would like to change the programme while in
operation, follow the steps below.
4.3 Cancelling a Programme
If you would like to cancel a programme while in
operation.
NOTE: Do not open the door before the
programme is complete.
NOTE: If the door of the machine is opened
or the power is cut off while a programme is in
operation, the programme will continue when the
door is closed or the power returns.
NOTE: If the power is cut off or the machine
door is opened during the drying process, the
programme will terminate. Your machine will now be
ready for a new programme selection.
NOTE: Open the door slightly at first to avoid
water spillage if you wish to stop the wash programme
before it is complete.
4.4 Switching the Machine off
1
4
2 3
Open the door and press the
Programme Selection button to
select a new programme.
After closing the door, the new
programme will resume the
course of the old programme.
==
=
=
Press and hold the Programme Selection
button for 3 seconds. The End Of
Programme Indicator will flash and the
programme light will switch off.
The water discharge process will start after
the door of the machine is closed and will
continue for 30 seconds. When
a programme is cancelled, a buzzer will
sound 5 times and the End Of Programme
Indicator will illuminate.
When the door of your machine is
opened, the light corresponding to the
most recently selected programme will
illuminate.
=
When a programme is complete, the End Of
Programme Indicator will illuminate and a signal
will sound 5 times. You can then switch your
machine off using the Power On/Off button.
Disconnect the plug and turn off
the water tap.