Bush CTV401, Инструкция по эксплуатации, Страница: 40 / 56

Advanced features
Getting the most from your TV
Advanced features 40
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Connecting a USB storage
device
1. Switch OFF the TV before connecting an USB
storage device.
2.
Connect your USB storage device to one of the
USB ports on the side of the TV.
3. Plug the connected devices into the mains socket
(if required)
4.
Press the STANDBY button on the TV or the
button on the remote control to turn on your TV.
• If a hard disc is used, make sure it’s mains
adapter is connected to the mains supply.
• If a USB hub is used, make sure it’s mains
adapter is connected to the mains supply as
the total current consumption may exceed
500mA.
• The maximum supported storage space of
the hard disk is 1TB.
• Supported file systems: FAT 16, FAT32 and
NTFS (compressed files not supported).
• In order to store recordings of a DTV
programme the transfer rate of the USB
device must be 5MB/s or higher. If not the
picture and sound will be affected. A warning
statement will be displayed on-screen.
• The TV screen will be black initially while the
hard disk is connected. This is normal and
the starting time may vary depending on the
connected device and storage size of the
connected device.
• Disconnect the USB device if not in use.
• USB output: DC 5V 500mA.
Rear view of TV
USB
Flash drive
Portable
hard disk
Mains
adapter
USB cable
(Not included)
USB
Common interface
Mini AV Mini YPbPr