Bush CTV401, Инструкция по эксплуатации, Страница: 21 / 56

Connections
Bringing it all together
Connections 21
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105 .
Connecting an AV device with an
HDMI cable (continued)
1. Use an HDMI cable to connect the TV’s HDMI
input socket to the external AV device’s HDMI
output socket.
2. Plug the connected device(s) into the mains
socket.
3.
Press the STANDBY button on the TV or the
button on the remote control to turn on your TV.
4. Press the SOURCE button on the TV or remote
control to display the source list. Use the
buttons to select HDMI 1/2/3 and then press the
OK button to confirm.
Although this TV is able to connect to an HDMI
device, it is possible that some devices may not
operate correctly.
Connecting a computer with a VGA
cable
1. Use a VGA cable to connect the TV’s PC input
socket to a computer’s VGA output socket. Use an
audio cable to connect the TV’s PC AUDIO input
socket to the computer’s audio output socket.
2.
Plug the connected devices into the mains socket.
3.
Press the STANDBY button on the TV or the
button on the remote control to turn on your TV.
4. Press the SOURCE button on the TV or remote
control to display the source list. Use the
buttons to select PC and then press the OK button
to confirm.
• The best resolution is 1920 x 1080
• If your computer is set to shut down after a
few minutes of idle mode, the TV will also
switch to standby mode due to no signal
being received. This is to save energy. Press
the STANDBY button on the right side of the
TV when viewed from the front or the
button on the remote control to restart the TV.
Rear view of TV Side view of TV
Game
console
Set-top
box
Blu-ray player/
DVD player/ recorder
HDMI cable
(not included)
HDMI1 HDMI2 HDMI3
Rear view of TV
Audio cable
(not included) VGA cable
(not included)
Computer
PC
audio in
LAN VGA SCART