Bush CMC1113DABBT, Инструкция по эксплуатации

Страница: 42 / 56

Using your Micro System
Let’s get started
Using your Micro System
42
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Factory reset
There may be times when you need to reset the unit back to its original factory setting.
The factory reset function can ONLY be activated from DAB or FM mode.
1.
Press the MENU button on the remote or press and hold the MENU/INFO button on
the micro system.
2. When the ‘FULL SCAN’ option appears (DAB mode) or ‘SCAN SETTING’ (FM mode)
press either TUNE or TUNE buttons on the remote or
/ buttons on the
micro system and locate ‘SYSTEM’, press the ENTER button on the remote or UNPAIR/
ENTER on the micro system.
3. Use the TUNE or TUNE buttons on the remote or / buttons on the micro
system to find ‘FACTORY RESET’ and press the ENTER button on the remote or
UNPAIR/ENTER on the micro system.
4.
Use the TUNE or TUNE buttons on the remote or / buttons on the micro
system to select ‘YES’ and press the ENTER button on the remote or UNPAIR/ENTER
on the micro system.
Standby backlight
When the unit is standby mode the backlight will dim after 10 seconds. Press the LIGHT
button on the remote control to illuminate the backlight for 10 seconds.