Bush CMC1113DABBT, Инструкция по эксплуатации

Страница: 29 / 56

Using your Micro System
Let’s get started
Using your Micro System
29
section of these instructions, or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on
0345 600 3021
.
Storing station presets
Follow the below steps to store a tuned station to one of 10 preset locations to allow
quick access.
1.
Tune to the station you wish to store as a preset and follow the below instructions.
2. Press and hold the MEMORY button on the remote control. The display will show
‘1: EMPTY’, where ‘1’ is the selected preset location.
(Fig 14)
3. Use the TUNE or TUNE buttons on the remote or / buttons on the micro
system to select the preset number from 1-10 you wish to use. Then press the ENTER
button on the remote or UNPAIR/ENTER on the micro system to store.
4.
When stored the display will show ‘PRESET ‘X’ STORED’.
Once a station is saved to a preset you will no longer see ‘#: EMPTY’ when pressing
and holding the MEMORY button, instead the station name or frequency will appear.
Recalling station presets
1. To recall a stored preset station press the relevant numeric button on the remote
control.
2. For example to recall the station stored on preset 3 press the numeric button ‘3’. And
to recall a station stored on location 10, press the ‘10+’ button and then the ‘0’ button.
3.
Alternatively use the PRESET / PRESET buttons on the remote to cycle through the
preset list.
Preset Store
<1: <Empty> >
Fig 14.