Bush CBB193MP3BLK, Инструкция по эксплуатации

Страница: 28 / 32

Product support
Help is always at hand
Product support
28
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Troubleshooting
Problem Reason(s) Solution(s)
No power Power cable not connected
to wall socket.
Power socket is not
switched on.
Auto standby mode is
active.
Make sure the plug is
connected.
Switch the power on.
Press the PLAY/PAUSE/
PWR button. See page 16
‘STANDBY MODE’ section.
No Sound CD/MP3CD
No Sound from AUX IN
Volume is too low.
3.5mm audio cable is
connected to the AUX input
socket.
AUX IN source volume is
too low.
Increase the volume.
Remove the cable to
resume normal playback.
Increase the output volume
of the AUX IN source.
Sound is distorted
Sound is distorted from
AUX IN
Volume is too high.
AUX IN source volume is
too high.
Reduce the volume.
Reduce the output volume
of the AUX IN source.
Unable to Play CD No disc in the tray.
Disc not loaded properly
Disc is dirty. Insert a compatible disc.
Check the disc loaded
Clean the disc.
Static sound (radio) Poor reception. Re-locate the antenna.