Bush BFSLNB9B, Инструкция по эксплуатации

Страница: 36 / 41

Product support
Product support
Help is always at hand
Troubleshooting
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on
0345 257 7271.
TROUBLE
CODE
POSSIBLE FAULT WHAT TO DO
F5
Insufficient water
Make sure the water inlet tap is open and water is flowing
Separate the inlet hose from the tap and clean the filter of the hose.
Contact for service if the error continues.
F3
Continuous water input
Close the tap and contact for service.
F2
Inability to discharge water
Water discharge hose and filters may be clogged.
Cancel the program.
If the error continues, contact for service.
F8
Heater error
Contact for service.
F1 Overflow
Unplug the machine and close the tap.
Contact for service.
FE Faulty electronic card Contact for service.
F7 Overheating Contact for service.
F9 Divisor position error Contact for service.
F6 Faulty heater sensor Contact for service.
PRACTICAL INFORMATION
When the machine isn’t in operation:
•
Disconnect the plug and close the tap.
•
Leave the door slightly open to prevent odour formation
Select the dry option to remove water droplets.
Place dishes in the machine properly to achieve the best energy consumption, washing and drying performance.
Please see the programme and consumption table for more information.
Rinse dirty dishes before placing them in the dishwasher.
Only use the Prewash programme when necessary.
Do not place the machine near a refrigerator because it will reach high temperatures.
If the machine is located in an area that is at risk of freezing, close the tap, disconnect the inlet hose from the tap
and drain the water inside the hose and the machine completely.
35