Bush BFSLNB9B, Инструкция по эксплуатации

Страница: 16 / 41

Installing your D ishwasher
16
Installing your Dishwasher
Bringing it all together
Positioning your Dishwasher
When positioning the machine, place it in
an area where dishes can be easily loaded
and unloaded.
D o not put the machine in an
area where the ambient temperature falls
below
0°C. .
R ead all warnings located on the packaging
before removing the packaging and
positioning the machine.
P lace the machine close to a water tap
and drain. Take into consideration that the
connections will not be altered once the
machine is in position.
D o not hold the machine by its door or
panel.
L eave an ade q uate distance around the
machine to allow ease of movement when
cleaning.
Ensure the water inlet and outlet
hoses are not s q uee z ed or trapped
and that the machine does not stand on the electrical
cable while positioning.
Adj ust the feet so the machine is level and
balanced. The machine should be placed
on flat ground otherwise it will be unstable
and the door of the machine will not close
properly.
Water connection
We recommend fitting a filter to your water
inlet supply in order to prevent damage to
your machine due to contamination (sand,
rust, etc.) from indoor plumbing. This will
also help prevent yellowing and deposit
formation after washing.
Water Inlet Hose
W ARNING: U se the new water inlet hose
supplied with your machine, do not use an old
machine ' s hose.
W ARNING: Ru n water through the new hose
before connecting.
W ARNING: Co nnect the hose directly to the
water inlet tap. The pressure supplied by the tap
should be a minimum of
0.03MPa and a maximum
of 1 MPa If the pressure exceeds 1 MPa , a pressure
relief valve must be fitted between the connection.
W ARNING: Aft er the connections are made,
turn the tap on fully and check for water leaks.
A lways turn off the water inlet tap after a wash
program has finished.
A n A q uastop water spout is available with
some models. D o not damage it or allow it to
become kinked or twisted.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on
0345 257 7271.