Bush BBISGLPYROBLK, Инструкция по эксплуатации

Страница: 14 / 36

Installing your electric cooker
Bringing it all together
Installing your Electrical Cooker
14
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Installation and preparation for use
WARNING :
This appliance must be installed by an
authorised service person or qualified technician,
according to the instructions in this guide and in
compliance with the current local regulations.
Incorrect installation may cause harm and damage, for
which the manufacturer accepts no responsibility and
the warranty will not be valid.
Prior to installation, ensure that the local distribution
conditions (electricity voltage and frequency) and the
adjustments of the appliance are compatible. The
adjustment conditions for this appliance are stated on
the label.
The laws, ordinances, directives and standards in
force in the country of use are to be followed (safety
regulations, proper recycling in accordance with the
regulations, etc.).
Instructions for the Installer
General instructions
After removing the packaging material from the
appliance and its accessories, ensure that the appliance
is not damaged. If you suspect any damage, do not use
it and contact an authorised service person or qualified
technician immediately.
Make sure that there are no flammable or combustible
materials in the close vicinity, such as curtains, oil, cloth
etc. which may catch fire.
The worktop and furniture surrounding the appliance
must be made of materials resistant to temperatures
above 100°C.
The appliance should not be installed directly above a
dishwasher, fridge, freezer, washing machine or clothes
dryer.
Installation of the Oven
The appliances are supplied with installation kits and
can be installed in a worktop with the appropriate
dimensions. The dimensions for hob and oven
installation are given below.
A (mm) 557 min./max. F (mm) 560/580
B (mm)
550
min. G (mm)
555
C (mm) 595 min. H (mm) 590
D (mm) 575 min. I (mm) 600
E (mm) 576 min. J/K (mm) 5/10
F
A B
C
C
D
E
G
H
J
I
Installation under a worktop
F
A
B
C
C
D
E
G
H
J
J
K
I
Installation in a wall unit
1. After making the electrical connections, insert the
oven into the cabinet by pushing it forward. Open
the oven door and insert 2 screws in the holes
located on the oven frame. While the product
frame touches the wooden surface of the cabinet,
tighten the screws.
If the oven is installed under a hob:
1. The distance between the worktop and the top