Bush BBISGLPYROBLK, Инструкция по эксплуатации, Страница: 32 / 36

Product support
Help is always at hand
Product support 32
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Troubleshooting
If you still have a problem with your appliance after checking these basic troubleshooting steps, please
contact an authorised service person or qualified technician.
Problem Possible Cause Solution
Oven does not switch on. Power is switched off.
Check whether there is power supplied.
Also check that other kitchen appliances are
working.
No heat or oven does not warm up.
Oven temperature control is
incorrectly set.
Oven door has been left open.
Check that the oven temperature control
knob is set correctly.
Oven light (if available) does not operate.
Lamp has failed.
Electrical supply is
disconnected or switched off. Replace lamp according to the instructions.
Make sure the electrical supply is switched
on at the wall socket outlet.
Cooking is uneven within the oven.
Oven shelves are incorrectly
positioned.
Check that the recommended temperatures
and shelf positions are being used.
Do not frequently open the door unless you
are cooking things that need to be turned.
If you open the door often, the interior
temperature will be lower and this may
affect the results of your cooking.
The appliance door cannot be opened; the
door lock symbol or signal lamp lights up on
the display.
The appliance door is locked
due to the pyrolytic function. Wait until the cooking compartment has
cooled and the door lock symbol goes out.
The timer buttons cannot be pressed
properly.
There is foreign matter caught
between the timer buttons.
Touch model: there is
moisture on the control panel.
The key lock function is set.
Remove the foreign matter and try again.
Remove the moisture and try again.
Check whether the key lock function is set.
The oven fan is noisy. Oven shelves are vibrating.
Check that the oven is level.
Check that the shelves and any bake ware
are not vibrating or in contact with the oven
back panel.
After the “pyrolysis” cleaning cycle, it is not
possible to select a function.
The oven cools itself by
operating the cooling fan after
“pyrolysis”.
Verify whether the door locking device has
switched off. If it has not, the oven is still
in the cooling period. During the cooling
fan period, no cooking function can be
operated.
Transport
If you need to transport the product, use the original product packaging and carry it using its original case. Follow
the transport signs on the packaging. Tape all independent parts to the product to prevent damaging the product
during transport.
If you do not have the original packaging, prepare a carriage box so that the appliance, especially the external
surfaces of the product, is protected against external threats.