Fixed gas connection
The appliance is supplied with the most common
parts required to connect the appliance to a fi xed
gas connected.
Additional spares can be supplied by calling
the Customer Helpline on
0345 257 7271
.
If the appliance is to be connected to the gas inlet
using a fi xed gas connection, the following
must
be observed:
•
The nut on the gas manifold
must
always
remain in a fi xed position. Only rotate mating
parts.
•
Use the correct size tools for all connections.
•
Only the supplied seals should be used.
Do
not
use plumbing seals to make connections.
Alternative supplies
The appliance is equipped for connection in the
country of manufacture. This is indicated on the
rating plate of the appliance.
If the appliance is to be used in another country,
the alternative connections shown in fi gure 3
may be used.
You must
only use the alternative
connections designed for the selected supply.
The connection of the appliance should be
performed in accordance with local and
international standards and applicable regulations.
You can fi nd the information related to appropriate
gas types and appropriate gas injectors in
the Technical Specifi cations of the Operating
Instructions.
If the gas pressure used is different to the values
in the Technical Specifi cations or the gas supply
pressure is not stable, the gas inlet requires a
pressure regulator.
You must contact your authorised service agent to
make these changes.
Flexible hose connection
If the appliance is to be connected to the gas
inlet with a fl exible hose, the following
must
be
observed:
•
The fl exible hose must be secured with a pipe
collar.
•
The fl exible hose must not exceed 1.5m in
length and should be kept as short as possible.
•
Inspect the fl exible hose prior to installation and
annually for signs of damage including ruptures,
bends or folds.
Do not
use damaged hoses.
•
Make sure the fl exible hose is located away
from sharp objects.
WARNING
– Do not use naked fl ames or sources
of ignition to perform leak tests.
•
All connections including the fl exible hose must
be leak tested using a suitable fl uid.
IMPORTANT
– Make sure all metal connections
are free from rust. Rust may pose a potential
source of ignition.
Installation
Customer Helpline
0345 257 7271
Gas connection
Figure 3
5
