Bush 311010, Инструкция по эксплуатации

Страница: 20 / 32

Using your LED Speaker
Let’s get started
Using your LED Speaker
20
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Receive an incoming call:
1. Press and release the on your LED speaker or answer the call as usual on your
mobile phone. You will be able to hear your caller through your LED Speaker and your
caller will also be able to hear you.
2. Press and release the on the LED Speaker or on your mobile phone to end the
call.
Aux in mode
Check that your LED Speaker is in Aux in mode. If you are not already in Aux in mode,
press and release the M button until you are in Aux in mode.
1. Connect one end of the supplied 3.5mm audio cable to the headphone (or auxiliary
out) socket of your secondary device, connect the other end to the Aux in socket on
the back of your LED Speaker.
2. Press the Play button on your external device to start playback through the LED
Speaker.
3.
To gain optimal volume levels, adjust the volume level on both the secondary device
and on the LED Speaker.
Note:
It is recommended that you unplug the audio cable from the Aux in socket on
the back of the LED Speaker, after you have finished listening to your external device.