Bush 311010, Инструкция по эксплуатации

Страница: 18 / 32

Using your LED Speaker
Let’s get started
Using your LED Speaker
18
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Bluetooth mode
1. Check that your LED Speaker is in Bluetooth mode and you have connected or ‘paired’
a product with your LED Speaker, please refer to ‘Connect to a Bluetooth device on
page 13.
Listening to Music/Audio using Bluetooth
In Bluetooth mode:
1. Select and start the music or audio that you wish to listen to on your paired Bluetooth
device, it will now be heard through the LED Speaker. Adjust the volume on the
connected device and/or your LED Speaker
2.
You can use the controls on your paired Bluetooth device as well as those on your
LED Speaker.
• Play/Pause:
Press and release to play/pause.
• Skip back:
Press and release to skip back to the previous track.
• Skip forward:
Press and release to skip forward to the next track.
LED light display
Your LED speaker has 5 different LED light display options for you to choose from, as well
as an LED display off option.
1. Press and release the button to change the LED light display or choose LED display
off. 5 LED light display options are available (Fig 5)
Note: The Club and Equalize themes only display when music is playing and the
volume of the connected device should be set at above 50%.
Fig 5.