Bush Hog Zero Turn Professional Series, Руководство оператора

Страница: 16 / 34

16. PUMP BYPASS-TO MOVE THE TRACTOR
WITHOUT POWER: The pump bypass valves
are located on the forward sides of each pump.
Turn the control clockwise two complete
turns to release the pump for free wheeling; turn
them counter-clockwise to resume operation.
Pumps as seen from above. Use a rod through the hex
head, or a 5/8” wrench to open or close the valve.
WARNING
AVOID SERIOUS INJURIES TO OTHERS:
ALWAYS REMOVE THE KEY FROM THE IGNI-
TION SWITCH WHENEVER THE MOWER IS UN-
ATTENDED TO PREVENT CHILDREN OR
UNAUTHORIZED PERSONS FROM STARTING
THE ENGINE.
NOTE: To move the tractor without power, the pumps
must be unlocked and in the free wheel position. Fail-
ure to do so could possibly damage the hydraulic mo-
tors. Never pull at more than 2 MPH.
17. FUEL TANK SELECTOR VALVE: Located on
the front panel below the operator is the fuel
directional valve. This valve has three positions
for operations and each position is made in 1/4
turn increments. This directional valve has a shut
off position and can be used when the machine
will not be used for a few days or when the unit is
transported to and from a work site.
Fuel Flow Valve Position EFI Valve Position
Off Down Right
Right Tank Right Down
Left Tank Left Left
MOWING RECOMMENDATIONS
1. Keep mower blades sharp.
2. Make sure deck and discharge chute are clean.
3. Pivoting Front Axle Settings - The Professional
Series pivoting front axle increases operator
comfort, traction, mower life and improves quality
of cut. In some conditions stopping the front axle
from pivoting will improve the evenness of the
cut. It can also reduce scuffing of the anti-scalp
rollers when mowing on uneven terrain.To set
the front axle in a fixed position, move the lock-
ing pins to the outer positions. (See page 21)
ROTARY MOWERS CAN DISCHARGE OBJECTS
AT HIGH SPEEDS. TO AVOID SERIOUS IN-
JURIES OR DEATH:
l l OPERATE ONLY WITH SIDE BANDS IN
GOOD REPAIR AND CHUTE OR GRASS
CATCHER ATTACHMENT INSTALLED.
l l KEEP CHILDREN, PETS, AND BYSTANDERS
AWAY FROM THE WORK AREA.
l l DO NOT OPERATE MOWER IN THE VICIN-
ITY OF OTHER PERSONS.
l l DISCHARGE AWAY FROM BUILDINGS,
WALLS OR OTHER STRUCTURES.
TO AVOID SERIOUS INJURY FROM BLADE CON-
TACT, POWER MUST BE OFF TO CLEAN DIS-
CHARGE CHUTE. KEEP HANDS AND FEET
AWAY FROM UNDERNEATH MOWER TO AVOID
SERIOUS INJURY OR DEATH.
WARNING
Hydrostatic Fluid
Reservoir
Cutting Height
Adjustment Pin
Fuel Tank
Selector Valve
14
Engine Oil
Filler Cap
Electrical
Fuses
Operator Weight
Adjustment Knob
DANGER
Fuel Tank
Site Lines
Seat Slide
Release Lever
DC Power Outlet
Parking Brake Lever