background image

MS1300P 
Manure Spreader

Controls 

21

7.  Controls 

 WARNING!

Do not operate the machine until you are 

thoroughly familiar with the position and function 

of the various controls. Read the operator’s 

manual thoroughly. Your safety is involved!

W065

Before starting work, all operators should familiarize themselves 
with the location and function of the machine controls.

• 

Set the beater-bar and apron drive speed, as required. 

• 

Engage the tractor's PTO to control the manure spreader.

7.2.1  PTO Controls

For information about operation of the PTO control, see the 
tractor operator's manual.

7.2.2  Beater-bar and Apron Drive 

IMPORTANT!  Turn off the PTO before selecting position 5 
(return). When you select position 5, the engagement lever 
moves to position 1 (low). Failure to turn off the PTO before 
selecting position 5 will cause damage to the drive gearbox

.

The beater-bar and apron drive speed are controlled by the 
tractor driver using the nylon speed-control rope. The driver 
pulls and releases the speed-control rope to select one of the 
five speed-control settings.

01457

Fig.  12 – 

Beater-bar and Apron Drive Speed Control

The five-position speed-control indicator is located on the front 
of the main box, near the PTO connection.

01458

5

4

3

2

1

1

Fig.  13 – 

Five-Position Speed-control Indicator

Indicator

Description

Caution: the beater-bar assembly is rotating.

The beater-bar assembly is stopped.

1

Low

: the apron drive is set to a steady speed, 

for an even application of manure.

  

2

Stop

: the apron drive is stopped.

3

High

: the apron drive is set to a fast speed, 

for a heavy application of manure.

4

Clean out

: the apron drive is set to a rapid 

speed, to quickly clean out the main box.

5

1

Return

: the engagement lever moves to 

setting 5 (return), and then automatically 
returns to setting 1 (low).

Содержание MS1300P













































Отзывы: