Bush Hog HT210, Руководство оператора

Страница: 42 / 62

OPERATION
HT210
06/17
Operation Section 4-10
OPERA
T
ION
© 2016 Alamo Group Inc.
Conversely, when the driveline shaft is contracted
to the maximum, there should still be a gap of
approximately 2” (50 mm).
Figure OP-225
Take particular care when connecting the two
Driveline shaft end forks and make sure that they
are fully secured. This is achieved by inserting the
safety pins and bolts (1) in the special slots (2) on
the power takeoff shafts on both the tractor and
implement ends.
Figure OP-226 .