manualshive.com logo in svg

Bush Hog 2310 Series, Руководство оператора

Поделиться
Скачать
Bush Hog 2310 Series Скачать руководство пользователя страница 122

OPERATION

2310 SERIES 09/20

Operation Section 4-14

© 2020 Alamo Group Inc.

OPERA

TION

6.2 Setting Mowing Height - Pull Type

1. Park the tractor and mower on level ground.
2. Using the hydraulic cylinder or ratchet attached

to the rear axle position the front skid shoes 1”
less off the ground of the desired mowing height.
(Example: If a 3” cut is desired Place the Skid-
shoes at 2” off the ground.) If a hydraulic cylinder
is used for height control, stroke spacers can be
placed on the cylinder rod to maintain a set cut-
ting height.

2. Adjust the two Leveling Rods so the front of the

mower is approximately 3/4” lower than the rear.

3. Level Rod adjustment is achieved by loosening

the lock nut against the turnbuckle, then rotate
the turnbuckle to achieve the desired setting. 

4. Be sure Level rods are equally set to maintain a

level cut.

5. Tighten the lock nut against the turnbuckle to

maintain the setting.

6.3 Setting the Pitch

Leveling Rod

Lock Nut

Turnbuckle

Содержание 2310 Series













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды