manualshive.com logo in svg

Bush Hog 2310 Series, Руководство оператора

Поделиться
Скачать
Bush Hog 2310 Series Скачать руководство пользователя страница 106

ASSEMBLY

2310 SERIES 09/20

Assembly Section 3-10

© 2020 Alamo Group Inc.

AXLE HEIGHT CONTROL

2310 Models Axle Working Height is determined by either a mechanical Ratchet Assembly
or a single acting Hydraulic Cylinder using Stop Collar adjustments.

HYDRAULIC KIT INSTALLATION

1. Install the Hydraulic Cylinder to the machine with the Rod End of the cylinder to the cylinder lug on the

axle and the Base End of the cylinder to the mount lug on the base frame.

2. Remove the plug on the Rod End of the cylinder and replace with the Breather Plug supplied.
3. Remove the plug at the base end of the cylinder and install the Hydraulic Adaptor  9/16” JIC x 3/4” SAE

with “O” ring in the cylinder.

4. Attach the Hydraulic Hose to the adaptor.
5.  There are two adaptors furnished in the kit to adapt the hose to the fitting used in the hydraulic port on

the tractor. Determine which adaptor is required for your application and install to the hydraulic hose.

6. Attach the fitting for the tractor hydraulic port to the hose.
7. Make sure all fittings at tight and plug in hose to tractor hydraulic port.

DO NOT ATTEMPT TO CHARGE THE HYDRAULIC CYLINDER WITHOUT THE BREATHER PLUG
INSTALLED. DAMAGE TO THE CYLINDER MAY OCCUR.

8. Crank the tractor and from the drivers seat cycle the cylinder several times.
9. Extend the Cylinder Rod and install the Stop Collars to support the machine.

Stop Collar Kit

Breather 

Plug

Hydraulic Adaptor

9/16”JIC to3/4” SAE

with “O” Ring

Cylinder

Rod End

Cylinder

Base End

RATCHET INSTALLATION

1. Remove the Clevis Pins from the Ratchet Assembly and place the clevis ends to the Axle Lug and the

Mount Lug on the Base Frame.

2. Install the Clevis Pins

ASSEMBL

Y

Содержание 2310 Series













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды