manualshive.com logo in svg

BUSCH RA 0400 C, Инструкция по эксплуатации

Поделиться
Скачать
BUSCH RA 0400 C Скачать руководство пользователя страница 14

5 | Installation

14 / 32

0870201532_RA_RC0400-0630C_-0003_O2_IM_en

5.4 Fitting the Coupling

E

L

Coupling hub (machine side)

Coupling hub (motor side)

Coupling sleeve

Radial screw 

Max. admissible

torque: 17 Nm

In case of a machine delivery without motor:

• Fit the second coupling hub on the motor shaft (separately delivered).

• Axially adjust the sleeve in such a way until value "E" (or “L”) is reached.

• When the coupling adjustment is done, lock the coupling hub by tightening the

radial screw.

• Mount the motor on the machine by including the coupling sleeve.

For further coupling information, go to 

www.ktr.com

 and download the instruction

manual of the BoWex

®

 coupling.

5.5 Electrical Connection

DANGER

Live wires.

Risk of electrical shock.

• Electrical installation work must only be executed by qualified personnel.

NOTE

The operation with variable speed, i.e. with a variable-frequency drive or a soft starter
unit, is allowed as long as the motor is admitted and the permitted motor speed range is
neither underrun nor exceeded (see 

Technical Data [

►

 30]

).

Seek advice from your Busch representative.

• Make sure that the power supply for the motor is compatible with the data on the

nameplate of the motor.

• The electrical installation must comply with applicable national and international

standards.

• Provide a lockable disconnect switch on the power line so that the machine is com-

pletely secured during maintenance tasks.

• Provide an overload protection according to EN 60204-1 for the motor.

• Busch recommends installing a D-curve circuit breaker.

Содержание RA 0400 C

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды