manualshive.com logo in svg

BUSCH RA 0010 C, Инструкция по эксплуатации

Поделиться
Скачать
BUSCH RA 0010 C Скачать руководство пользователя страница 8

5 | Installation

8 / 24

Instruction Manual R5 RA_RC 0010-0016 C_EN_en

5

Installation

5.1 Installation Conditions

NOTICE

Use of the machine outside of the permitted installation conditions.

Risk of premature failure!

Loss of efficiency!

• Take care that the installation conditions are fully complied with.

20 cm

20 cm

20 cm

20 cm

• Make sure that the environment of the machine is not potentially explosive.

• Make sure that the ambient conditions comply with the 

Technical Data [

►

 20]

.

• Make sure that the environmental conditions comply with the protection class of the

motor and the electrical instruments.

• Make sure that the installation space or location is vented such that sufficient cooling

of the machine is provided.

• Make sure that cooling air inlets and outlets are not covered or obstructed and that

the cooling air flow is not affected adversely in any other way.

• Make sure that the oil sight glass (OSG) remains easily visible.

• Make sure that enough space remains for maintenance work.

• Make sure that the machine is placed or mounted horizontally, a maximum of 1° in

any direction is acceptable.

• Check the oil level, see 

Oil Level Inspection [

►

 14]

.

• Make sure that all provided covers, guards, hoods, etc. are mounted.

If the machine is installed at an altitude greater than 1000 meters above sea level:

• Contact your Busch representative, the motor should be derated or the ambient

temperature limited.

Содержание RA 0010 C

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды