BUSCH R 5 Скачать руководство пользователя страница 6

Страница: 6 / 28

3 | Transport

6 / 28

0870569784_RA_RC1000-1600B_-0003_IM_en

2.4.2 Inlet Filter

It protects the machine against dust and other solids in the process gas. The inlet filter is
available with a paper or polyester cartridge.

2.4.3 Water-oil Heat Exchanger

In case of unfavourable ambient conditions a water-oil heat exchanger can be provided.

2.4.4 Resistance Thermometer

The resistance thermometer monitors the oil temperature of the machine.

Depending on the oil type, a warning and a trip signals must be set, see

Oil [

}

23]

2.4.5 Pressure Switch

The pressure switch monitors the pressure in the oil separator.

The machine must be stopped when the gas reaches a certain pressure, see

Wiring Dia-

gram Pressure Switch (Optional) [

}

13]

2.4.6 Pressure Transmitter

The pressure transmitter monitors the pressure in the oil separator.

A warning and an trip signals must be set, see

Wiring Diagram Pressure Transmitter

(Optional) [

}

14]

Transport

WARNING

Suspended load.

Risk of severe injury!

• Do not walk, stand or work under suspended loads.

NOTICE

In case the machine is already filled with oil.

Tilting a machine that is already filled with oil can cause large quantities of oil to in-
gress into the cylinder. Starting the machine with excessive quantities of oil in the
cylinder will immediately break the vanes and ruin the machine!

• Drain the oil prior to every transport or always horizontally transport the machine.

All manuals and user guides at all-guides.com

all-guides.com

Содержание R 5





























Результаты поиска

Содержание R 5

Отзывы:

Похожие инструкции для R 5

Бренды по названию

Популярные бренды

BUSCH R 5, Инструкция по эксплуатации

Результаты поиска

Содержание R 5

Отзывы:

Похожие инструкции для R 5

Бренды по названию

Популярные бренды