Storage | 4
0870207738_RA_RC0400-0630C_USA_-_IM_en
7 / 32
WARNING
Motor eye bolt.
Risk of severe injury!
• Do not lift the vacuum pump using the eye bolt fitted to the motor. Only lift the vac-
uum pump as previously shown.
• Check the vacuum pump for transport damage.
If the vacuum pump is secured to a shipping base:
• Remove the vacuum pump from the shipping base.
4
Storage
• Seal the suction and discharge connections with adhesive tape or reuse provided caps.
NOTICE
Do not remove covers from pump suction or discharge until connections are ready to be
made.
Risk of damage to the vacuum pump!
• The covers prevent dirt and other foreign material from entering the pump.
If storage for more than 3 months is scheduled:
• Wrap the vacuum pump in a corrosion inhibiting film.
• Store the vacuum pump indoors, dry, dust free and if possible in original packag-
ing preferably at temperatures between 32 ... 104 °F.
5
Installation
5.1 Installation Conditions
NOTICE
Do not use the machine outside of the permitted installation conditions.
Risk of premature failure!
Loss of efficiency!
• Take care that the installation conditions are fully complied with.
