3 | Transport
6 / 24
0870168409_MV0602B_O2_A0000_IM_en_MD
2.4.2 Temperature Transmitter
The temperature transmitter monitors the gas temperature of the machine.
The gas temperature must not exceed the permitted trip signal temperature, see
.
A Trip signal must be set, see Wiring Diagram Temperature Transmitter.
2.4.3 Flow Control Device
The flow control device monitors the cooling air volume flow of the machine.
The cooling air volume flow must neither exceed nor underrun the permitted monitor-
ing speed range, see
A monitoring range is pre-installed, see Wiring Diagram Flow Control Device.
2.5 Optional Accessories
2.5.1 Inlet Filter
The inlet filter protects the machine against dust and other solids in the process gas.
The inlet filter is available with a paper or polyester cartridge.
The inlet filter protects the machine against dust and other solids in the process gas.
The inlet filter is available with a paper or polyester cartridge.
3
Transport
WARNING
Suspended load.
Risk of severe injury!
• Do not walk, stand or work under suspended loads.
WARNING
Lifting the machine using the motor eye bolt.
Risk of severe injury!
• Do not lift the machine using the eye bolt fitted to the motor. Only lift the machine as
shown.
• Make sure that the eyebolt(s) (EB) is/are in faultless condition, fully screwed in and
tightened by hand.
