BUSCH Mink MV 1202 A, Инструкция по эксплуатации

Страница: 25 / 28

EU Declaration of Conformity | 14
0870159870_MV1202A_A0003_IM_en_MD 25 / 28
14 EU Declaration of Conformity
This Declaration of Conformity and the CE-mark affixed to the nameplate are valid for the machine within the
Busch scope of delivery. This Declaration of Conformity is issued under the sole responsibility of the manufac-
turer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate ma-
chinery (this can be the operating company, too) must conduct the conformity assessment process for the su-
perordinate machine or plant, issue the Declaration of Conformity for it and affix the CE-mark.
The manufacturer Busch Produktions GmbH
Schauinslandstr. 1
DE-79689 Maulburg
declares that the machine(s): MINK MV 1202 A
fulfil(s) all the relevant provisions from European directives:
– ‘Machinery’ 2006/42/EC
– ‘Electromagnetic Compatibility’ 2014/30/EU
– ‘RoHS’ 2011/65/EU Restriction of the use of certain hazardous substances in electrical and electronic
equipment (incl. all related applicable amendments)
and comply(-ies) with the following designated standards that have been used to fulfil those provisions:
Standard Title of the Standard
EN ISO 12100 : 2010 Safety of machinery - Basic concepts, general principles of design
EN ISO 13857 : 2019 Safety of machinery - Safety distances to prevent hazard zones being
reached by the upper and lower limbs
EN 1012-1 : 2010
EN 1012-2 : 1996 + A1 : 2009 Compressors and vacuum pumps - Safety requirements - Part 1 and Part 2
EN ISO 2151 : 2 : 2008 Acoustics - Noise test code for compressors and vacuum pumps - Engineer-
ing method (grade 2)
EN IEC 60204 : 2019 Safety of machinery - Electrical equipment of machines - Part 1: General re-
quirements
EN IEC 61000-6-2 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Immunity for in-
dustrial environments
EN IEC 61000-6-4 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Emission stand-
ard for industrial environments
EN ISO 13849-1 : 2015
(1)
Safety of machinery - Safety-related parts of control systems - Part 1: Gen-
eral principles for design
(1)
In case control systems are integrated.
Legal person authorized to compile the technical file
and authorized representative in the EU
(if the manufacturer is not located in the EU): Busch Dienste GmbH
Schauinslandstr. 1
DE-79689 Maulburg
Maulburg, 18.05.2021
Dr. Martin Gutmann
General Manager