BUSCH Mink MV 1202 A, Инструкция по эксплуатации

Страница: 20 / 28

8 | Overhaul
20 / 28 0870159870_MV1202A_A0003_IM_en_MD
8 Overhaul
WARNING
Machines contaminated with hazardous material.
Risk of poisoning!
Risk of infection!
If the machine is contaminated with hazardous material:
• Wear appropriate personal protective equipment.
NOTICE
Improper assembly.
Risk of premature failure!
Loss of efficiency!
• It is highly recommended that any dismantling of the machine that goes beyond
anything that is described in this manual should be done through Busch.
In case of the machine having conveyed gas that was contaminated with foreign ma-
terials which are dangerous to health:
• Decontaminate the machine as much as possible and state the contamination
status in a ‘Declaration of Contamination’.
Busch will only accept machines that come with a completely filled in and legally bind-
ing signed ‘Declaration of Contamination’ (form downloadable from
www.buschvacuum.com ).
9 Decommissioning
• Shut down the machine and lock against inadvertent start up.
• Vent the connected lines to atmospheric pressure.
• Disconnect all connections.
If the machine is going to be stored:
• See Storage [ ► 8] .
9.1 Dismantling and Disposal
• Drain the oil.
• Separate special waste from the machine.
• Dispose of special waste in compliance with applicable regulations.
• Dispose of the machine as scrap metal.
10 Spare Parts
NOTICE
Use of non-Busch genuine spare parts.
Risk of premature failure!
Loss of efficiency!
• The exclusive use of Busch genuine spare parts and consumables is recommended
for the correct functioning of the machine and to validate the warranty.