14 | EU Declaration of Conformity
36 | 40
Instruction Manual MINK MV 0500-0600 B_EN_en
14
EU Declaration of Conformity
This Declaration of Conformity and the CE-markings affixed to the nameplate are valid for the machine within the Busch scope of delivery. This
Declaration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery (this can be the operating
company, too) must conduct the conformity assessment process for the superordinate machine or plant, issue the Declaration of Conformity for it and
affix the CE-marking.
The manufacturer
Ateliers Busch S.A.
Zone Industrielle
CH-2906 Chevenez
declares that the machine: MINK MV 0500 B; MINK MV 0600 B
fulfill(s) all the relevant provisions from EU directives:
– ‘Machinery’ 2006/42/EC
– ‘Electromagnetic Compatibility’ (EMS) 2014/30/EU
– ‘RoHS’ 2011/65/EU Restriction of the use of certain hazardous substances in electrical and electronic equipment (incl. all related applicable
amendments)
and comply(-ies) with the following designated standards that have been used to fulfil those provisions:
Standards
Title of the Standard
EN ISO 12100 : 2010
Safety of machinery - Basic concepts, general principles of design
EN ISO 13857 : 2019
Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower
limbs
EN 1012-1 : 2010
EN 1012-2 : 1996 + A1 : 2009
Compressors and vacuum pumps - Safety requirements - Part 1 and Part 2
EN ISO 2151 : 2008
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
EN 60204-1 : 2018
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN IEC 61000-6-2 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Immunity for industrial environments
EN IEC 61000-6-4 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Emission standard for industrial
environments
EN ISO 13849-1 : 2015
(1)
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
(1)
In case control systems are integrated.
Legal person authorized to compile the technical file
and authorized representative in the EU
(if the manufacturer is not located in the EU):
Busch Dienste GmbH
Schauinslandstr. 1
DE-79689 Maulburg
Chevenez, 25.01.2022
Christian Hoffmann, General Director
