background image

Table of Contents

2 / 24

0870166451_MV0312B_B0004_IM_en_MD

Table of Contents

1 Safety ......................................................................................................................................3

2 Product Description...............................................................................................................4

2.1 Operating Principle.......................................................................................................... 5

2.2 Application....................................................................................................................... 5

2.3 Start Controls .................................................................................................................. 5

2.4 Standard Features .......................................................................................................... 5

2.4.1 Vacuum Relief Valve ............................................................................................ 5

2.5 Optional Accessories ...................................................................................................... 6

2.5.1 Inlet Filter.............................................................................................................. 6

3 Transport ................................................................................................................................7

4 Storage....................................................................................................................................7

5 Installation ..............................................................................................................................8

5.1 Installation Conditions ..................................................................................................... 8

5.2 Connecting Lines / Pipes ................................................................................................ 9

5.2.1 Suction Connection .............................................................................................. 9
5.2.2 Discharge Connection .......................................................................................... 9

5.3 Filling Oil ......................................................................................................................... 9

5.4 Electrical Connection ...................................................................................................... 10

5.4.1 Wiring Diagram Three-Phase Motor..................................................................... 11

6 Commissioning ......................................................................................................................12

6.1 Conveying Condensable Vapours................................................................................... 12

7 Maintenance ...........................................................................................................................13

7.1 Maintenance Schedule.................................................................................................... 14

7.2 Oil Level Inspection ......................................................................................................... 14

7.3 Cleaning from Dust and Dirt ............................................................................................ 14

7.4 Oil Change ...................................................................................................................... 15

8 Overhaul..................................................................................................................................17

9 Decommissioning ..................................................................................................................17

9.1 Dismantling and Disposal................................................................................................ 17

10 Spare Parts .............................................................................................................................18

11 Troubleshooting.....................................................................................................................19

12 Technical Data........................................................................................................................21

13 Oil ............................................................................................................................................21

14 EU Declaration of Conformity ...............................................................................................22

Содержание MINK MV 0312 B

























Отзывы: