BUSCH MINK MV 0312 B, Инструкция по эксплуатации

Страница: 20 / 24

11 | Troubleshooting
20 / 24 0870166451_MV0312B_B0004_IM_en_MD
The machine runs very nois-
ily. Worn coupling (CPL). • Replace the coupling
(CPL).
Oil level too low. • Top up oil.
Defective bearings. • Repair the machine (con-
tact Busch).
The machine runs too hot. Insufficient cooling. • Remove dust and dirt
from the machine.
Ambient temperature too
high. • Observe the permitted
ambient temperature,
see
Technical Data
[ ► 21] .
Temperature of the process
gases at the inlet too high. • Observe the permitted
gas inlet temperature,
see
Technical Data
[ ► 21] .
Oil level too low. • Top up oil.
For the solution of problems not mentioned in the troubleshooting chart contact your
Busch representative.