Installation | 5
Instruction Manual COBRA NC 1000 B WCV_EN_en
15 / 32
5.5 Fitting the Coupling
E
Coupling hub (machine side)
Coupling hub (motor side)
Coupling spider
Radial screw
Max. admissible
torque: 10 Nm
Machine type
Coupling size
Value “E” (mm)
NC 1000 B
ROTEX
®
48
28
In case of a machine delivery without motor:
• Fit the second coupling hub on the motor shaft (separately delivered).
• Axially adjust the hub in such a way until value "E" is reached.
• When the coupling adjustment is done, lock the coupling hub by tightening the
radial screw.
• Mount the motor on the machine by including the coupling spider.
For further coupling information, go to
and download the instruction man-
ual of the ROTEX
®
coupling.
5.6 Electrical Connection
DANGER
Live wires.
Risk of electrical shock.
• Electrical installation work must only be executed by qualified personnel.
• Make sure that the power supply for the motor is compatible with the data on the
nameplate of the motor.
• The electrical installation must comply with applicable national and international
standards.
• Provide a lockable disconnect switch on the power line so that the machine is com-
pletely secured during maintenance tasks.
• Provide an overload protection according to EN 60204-1 for the motor.
• Make sure that the motor of the machine will not be affected by electric or electro-
magnetic disturbance from the mains; if necessary seek advice from Busch.
• Connect the protective earth conductor.
• Electrically connect the motor.
Содержание COBRA NC 1000 B
Страница 31: ...Note...
