2 | Product Description
6 / 44
Instruction Manual COBRA NC 2500 B WCV_EN_en
NOTE
Technical term.
In this instruction manual, we consider that the term ‘machine’ refers to the ‘vacuum
pump’.
NOTE
Illustrations
In this instruction manual the illustrations may differ from the machine appearance.
2.1 Operating Principle
The machine works on the one-stage, twin-screw pump principle.
Two screw rotors are rotating inside the cylinder. The pumped medium is trapped be-
tween the cylinder and screw chambers, compressed, and transported to the gas out-
let. During the compression process, the two screw rotors do not come into contact
with each other nor with the cylinder. There is no need for a lubrication or an operating
fluid in the compression chamber.
2.2 Application
The machine is intended for the suction of air and other dry, non-aggressive, non-toxic
and non-explosive gases.
Conveying of other media leads to an increased thermal and/or mechanical load on
the machine and is permissible only after a consultation with Busch.
The machine is intended for the placement in a non-potentially explosive environment.
The machine is capable of maintaining ultimate pressure, see
.
The machine is suitable for continuous operation.
Permitted environmental conditions, see
2.3 Start Controls
The machine comes without start controls. The control of the machine is to be provid-
ed in the course of installation.
The machine must be equipped with a variable-frequency drive.