16 | UK Declaration of Conformity
40 / 44
Instruction Manual COBRA NC 2500 B WCV_EN_en
16 UK Declaration of Conformity
This Declaration of Conformity and the UKCA-mark affixed to the nameplate are valid for the machine within
the Busch scope of delivery. This Declaration of Conformity is issued under the sole responsibility of the manu-
facturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machin-
ery (this can be the operating company, too) must conduct the conformity assessment process for the superor-
dinate machine or plant, issue the Declaration of Conformity for it and affix the UKCA-mark.
The manufacturer
Ateliers Busch S.A.
Zone Industrielle
CH-2906 Chevenez
declares that the machine(s):
COBRA NC 2500 B
fulfill(s) all the relevant provisions from UK legislations:
– Supply of Machinery (Safety) Regulations 2008
– Electromagnetic Compatibility Regulations 2016
– Restriction of the use of certain hazardous substances in electrical and electronic equipment Regulations
2012
and comply(-ies) with the following designated standards that have been used to fulfil those provisions:
Standard
Title of the Standard
BS EN ISO 12100 : 2010
Safety of machinery. Basic concepts, general principles of design. Risk as-
sessment and risk reduction.
BS EN ISO 13857 : 2019
Safety of machinery - Safety distances to prevent hazard zones being
reached by the upper and lower limbs.
BS EN 1012-1 : 2010
BS EN 1012-2 : 1996 + A1 : 2009
Compressors and vacuum pumps. Safety requirements. Air compressors
and vacuum pumps.
BS EN ISO 2151 : 2008
Acoustics - Noise test code for compressors and vacuum pumps - Engineer-
ing method (grade 2)
BS EN 60204-1 : 2018
Safety of machinery. Electrical equipment of machines. General require-
ments.
BS EN IEC 61000-6-2 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Immunity stand-
ard for industrial environments.
BS EN IEC 61000-6-4 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Emission stand-
ard for industrial environments.
BS EN ISO 13849-1 : 2015
(1)
Safety of machinery. Safety-related parts of control systems. General princi-
ples for design.
(1)
In case control systems are integrated.
Legal person authorized to compile the technical file
and importer in the UK
(if the manufacturer is not located in the UK):
Busch (UK) Ltd
30 Hortonwood
Telford - UK
Chevenez, 14.05.2021
Christian Hoffmann, General Director
