Busch-Jaeger Compact Скачать руководство пользователя страница 19

Страница: 19 / 69

Device Functions

System Manual 2CKA001473B9426

│19

Extension unit operation

– An additional operation for switching on/off using a push-button on the extension input 1C of

the presence detector.
– A manual change of the current switching state can be implemented. The return to

automatic mode and/or previously selected operation mode takes place after the room is
left plus the set switch-off delay.

– The lighting is also switched on in semi-automatic mode through the operation of this

extension.

Continuous ON

– The lighting is switched on. For devices with infrared remote control, the duration amounts

to 8 hours. For devices with Bluetooth function, the duration is freely selectable through the
smartphone app "Busch-Wächter

Remote control".

– For the activation of this function, a push-button is connected to channel 1 of the 6494

Extension unit connection. In the case of the DALI master, the "Continuous Light"
function must be activated by extension push-button.

– The return to automatic mode and/or previously selected operation mode is

implemented through one of the following possibilities:

■

Push-button/extension operation (directly connected to the extension input 1C of the

presence detector).

■

Simultaneous actuation of the push-buttons for "Continuous ON" and "Continuous

OFF".

■

By app.

■

Automatic after the expiration of the "Continuous ON" time.

– This function cannot be combined with the panel light.

Continuous OFF

– The lighting is continuously switched off. For devices with infrared remote control, the

duration amounts to 8 hours. For devices with Bluetooth function, the duration if freely
selectable through the smartphone app "Busch-Wächter

Remote control".

– The continuous light is operated using a separate switch connected through the 6494

Extension unit connection.

– For the activation of this function, a push-button is connected to channel 2 of the 6494

Extension unit connection. In the case of the DALI master, the "Continuous Light"
function must be activated by extension push-button.

– The return to automatic mode and/or previously selected operation mode is

implemented through one of the following possibilities:

■

Push-button/extension operation (directly connected to the extension input 1C of the

presence detector).

■

Simultaneous actuation of the push-buttons for "Continuous ON" and "Continuous

OFF".

■

By app.

■

Automatic after the expiration of the "Continuous OFF" time.

– This function cannot be combined with the panel light.

Содержание Compact






































































Результаты поиска

Содержание Compact

Отзывы:

Похожие инструкции для Compact

Бренды по названию

Популярные бренды

Busch-Jaeger Compact, Системное руководство

Результаты поиска

Содержание Compact

Отзывы:

Похожие инструкции для Compact

Бренды по названию

Популярные бренды