33
Certain mobile telephones offer the possibility of being able to install
and operate a navigation solution. On many mobile phones, the sug-
gested directions are only transferred via the
Bluetooth
A2DP profile. If
you have not connected a suitable cable to the LINE-OUT output of the
HFCK and to the radio however, you are not able to hear these instruc-
tions.
With the External Audio menu item, it is possible to place these in-
structions on the PHONE-OUT output of the HFCK. This means that the
direction instructions are read out in monotone and the radio is also
muted. The HFCK takes priority with its functions, however, which me-
ans that if the voice control is active or in the event of an incoming call,
any direction instructions that are being issued at that time will be
muted.
Please note:
If the function is activated it is not possible to listen to
X
music via A2DP via the LINE-OUT output.
Via the Balance menu item, you are able to control the volume levels
of the different speakers in the vehicle. Due to the position of the dri-
ver, which in normal vehicles is not in the centre, the distance to certain
speakers is either greater or lesser. The human ear picks up on these
distances, and the spatial sound effect does not occur. Select the sub
points Left-Right or Front-Rear to be able to select the different
speaker positions.
In the views, the initial letters for the corresponding directions appear
under the settings bar with a small dot. You can move the dot under
Left-Right eight steps and the value at Front-Rear three steps in both
directions. If the dot is in the centre of the display then the values are
balanced.
In the Installation menu item, you specify the way in which the HFCK
has been installed in the vehicle. Please refer to the sections describing
the installation of the HFCK for a more detailed description.
External audio on
Balance
Left-Right
Front-Rear
Installation
