22
Operating guidelines
Using the
Number options
menu item, you are able to select as to whether the HFCK sends the
details of your own number along during an outgoing telephone call or not. Here, you have a choice of
three options:
Phone setting
,
Show number
and
Hide number
.
The telephone settings are set as standard. The display of your telephone number to your conversa-
tional partner depends on the settings of the call number display and/or suppression in the mobile
phone and the storage of the telephone numbers (with the additions *31# to show numbers or #31#
to hide numbers). If you select one of the two other entries in the HFCK the settings in your mobile
phone will no longer be taken into account. Your telephone number will then consistently either be
hidden or sent.
In the
DSP
menu item you control the settings for every telephone individually as regards the process-
ing of the audio signals. The HFCK has an integrated digital signal processor (DSP). This serves the
functions of voice recognition and voice synthesis and is activated as standard. Together with the sup-
pression of background noise and echoes, the DSP guarantees optimum conversational sound quality
for most mobile phones.
Note:
We recommend that you keep this setting.
X
If the conversational sound quality should fall, however, you can turn off the suppression of back-
ground noise and echoes and leave the DSP devices activated without this function running. Using the
first selection you can also completely deactivate the DSP. If this setting also leads to no improvement,
you can activate the DSP of the telephone.
With the
Clear list
command it is possible to delete the full telephone list. You are able to assign an
individual
Pin code
for the
Bluetooth connection in the next menu item. Your own code must be at
least four figures long – with a maximum of eight being allowed.
Thanks to the
Multipoint Function
you are able to connect two mobile phones at the same time with
the HFCK via
Bluetooth.
First, activate the Multipoint function in the system (
Menu->More->Settings
->Bluetooth->Phones->Multipoint
). Afterwards connect the first mobile phone and then connect
the second phone.
The primary mobile phone takes priority, which means that only its telephone books, call lists, voice
memos, SMS and possible emails are loaded and ready in the memory of the HFCK. This is similar to
the situation as though only one mobile phone were connected with the HFCK. If a call is received on
the secondary mobile phone, this call will also be handled via the HFCK. The display informs you ac-
cordingly as to which mobile is receiving the call (the first / second telephone).
Despite the huge number of tested mobile phones, we can not guarantee that all configurations will be
compatible with each other while using multipoint function.
