10
Installation of the hands-free car kit
Toggling between the installation options 1, 2 and 4 is done in the menu. You must open the options
in the menu in order to toggle between the installation options:
Menu -> Settings -> Audio -> Installation -> Option 1, 2, 3, 4
Option 1 is the standard setting upon delivery of the hands-free car kit. Music and voice are output via the
loudspeakers using the ISO jacks. The amplifiers of the hands-free car kit are used for playback. Mobile
audio is active in the device. In the case of this option the External audio cannot be switched off. The
“switching on the External audio” and “switching off the External audio” areas are inaccessible on the
display.
Options 2 and 4 feeds music to the radio via the four LINE cables, and voice signals are fed to the
loudspeakers via the ISO jacks. Additionally, after switching on the external audio, mobile audio can
be redirected to the car loudspeakers using ISO jacks.
Option 3 does not concern this device.
Output of voice (telephone) via
Output of music via
ISO
LINE
ISO
LINE
Option 1
Option 2
External audio off
-
External audio on
Option 3
It does not concern the CC 9056 Plus device
Option 4
refers to the device
with BURY
loudspeaker
External audio off
-
External audio on
Installation of the hands-free car kit
Step 1:
Pull the ISO jacks at the back of the radio off and replace them with the jacks at the ISO cable harness.
Connect the now free ISO jacks with both sockets from the ISO cable harness (see picture).
