24
Operating guidelines
Synchronise telephone book
If you change a telephone number in your telephone or you save a new
contact then you must subsequently manually synchronise the tele-
phone book with the data which is saved in the HFCK. The telephone
book will only be automatically reloaded or synchronised when restar-
ting the HFCK.
Info
In the menu Info you receive information on the installed software and
hardware of your hands-free car kit. You should write down these data
if you have problems in using the HFCK with your mobile telephone and
contact the Bury hotline or if you e.g. wish to update the firmware (the
operating system of the HFCK).
It can be useful to update the firmware (information at www.bury.com)
in case of a mobile phone change or when new functions have been
implemented. You can find the version number of the firmware after
the name of the HFCK, e.g. „CC 9055 V07h. In the sub-menu <DSP
Info> you can see whether the ‚digital signal processor‘ (DSP) in the
HFCK and in the mobile telephone (if available) is activated.
Day/Night
As the lighting conditions vary according to the time of the day, you
have the possibility to reduce or increase the brightness here.
Disconnect connection
If you want to disconnect a connected mobile phone from the HFCK,
simply press down on this symbol briefly.
Sleep Mode
The sleep mode of the display in standby operation is a useful function,
especially with night driving. The display thereby darkens slowly until
no contents are visible, regardless of whether a mobile telephone is
connected to the HFCK or not. During an active phone call, the screen
saver is deactivated.
